
Welcome to recovery made for more.
Your PeakMe Red Light Therapy Belt blends red light therapy, vibration and intelligent heat in a sleek, contoured design crafted in PeakMe's signature modern aesthetic. With customisable settings, memory mode and automatic shut-off, it shapes a simple daily ritual that supports circulation, eases tension and restores balance across the core. Smooth, refined and effortless, it brings modern recovery into your everyday rhythm.
Key Features
- 240 powerful LEDs using 660 nm + 850 nm wavelengths designed to support mitochondrial activity and healthy cell metabolism.
- Pulse mode to help stimulate local blood circulation and relieve muscle fatigue.
- Vibration function to help relax muscles, soothe joint tension and support post-exercise recovery.
- Portable wireless design with a long-lasting battery for effortless use anytime and anywhere.
What's in the box
Please inspect the package and make sure all items are present:
- 1x Therapy Belt
- 1x Power Cable
- 1x Extension Band
Specifications
Product Code: PK-RLT-BELT
Rated Power: 5 W
Colour: Black
Wavelength: 660nm (Red) and 850nm (Near-infrared)
Number of LEDs: 240 Dual Core
Frequency: 147 Hz / 294 Hz
Battery Capacity: 2000 mAh
Input Voltage: 5V DC
Charging Interface: Type-C
Irradiance (at surface): Up to 25 mW/cm²
Weight: 0.25 kg/0.55 lbs
Dimension: 1200x180x19mm / 47,24" x7.09" x0.75"
Quick Start Guide
Setting Up
1. Charge: Fully charge the device before first use. Brightness and vibration default to 100 percent on the first session. Memory mode activates after initial use and will recall your last settings.
2. Turn On: Press and hold On/Off button for 3 seconds to activate the device.
(Diagram labels: MODE / Charging indicator / Type-C Port / ON/OFF & Brightness setting)
3. Choose Mode: Short press the On/Off button to adjust brightness and vibration levels.
- One beep: 50 percent (147 Hz)
- Two beeps: 75 percent (294 Hz)
- Three beeps: 100 percent (Breathing Mode)
Continue pressing until you hear a long beep to disable frequency mode.
4. Wear: Check that the LEDs are illuminated. The device runs on a 10 minute cycle and will switch off automatically at the end of each session.
5. Store: After use, remove the therapy belt and place it in the storage box.
Reminders
- Red light flashing: charging
- Green light solid: fully charged
- Green light flashing: low battery
Regular charging helps maintain long-term battery performance.
Cleaning & Maintenance
Wipe down the device with a lint-free towel if they begin to get dusty otherwise store the belt in a cool, dry environment.
Storage / Transportation Environment
(a) Ambient Temperature· -40°C-55°C
(b) Relative Humidity: 0-93%
(c) Atmosptlenc Pressure: 86kPa~106kPa
Use Environment
(a) Ambient Temperature· 0°C-40°C
(b) Ambient Humidity: 80%
(c) Atmospheric Pressure: 86kPa~106kPa
Safety Information
Please keep this manual for reference.
General Use
- Do not look directly at the LED panel.
- Turn the device off if it becomes excessively warm.
- Do not disassemble the device.
- Avoid use if you have experienced sunburn in the past two weeks.
Electrical Safety
- Keep the device away from water and liquids.
- Do not wash electrical components.
- Do not touch plugs or switches with wet hands.
- Keep the device away from heated surfaces and flammable environments.
Do Not Use If
- You have open wounds.
- You are photosensitive or taking photosensitising medication.
- You are pregnant, breastfeeding or preparing for pregnancy.
- You have a history of light-triggered seizures.
Additional Precautions
- Not suitable for individuals who are unconscious, sleeping or unable to operate the device safely.
- Stop use immediately if discomfort occurs.
- Seek medical advice if an adverse reaction develops.
- Do not scratch, drop or expose the device to direct sunlight or high heat.
Failure to use, store and maintain the device as instructed may void your warranty.
Warranty
1 Year Residential Limited Warranty
1 Year Structure - Your Therapy Belt is warranted against blisters, cracks, or delamination of the interior surface of the Belt shell due to defects in workmanship or materials for one year from the original date of purchase. This Limited Warranty is void if PeakMe or its designated representative determines that the Therapy Belt has been subjected to damage or failure due to installation of after-market parts that are not Genuine PeakMe branded Parts & Accessories. Genuine PeakMe brand Parts & Accessories are built to our highest standards of quality, durability and performance, and they are designed to work with your Therapy Belt to ensure optimal performance and function.
Performance
To obtain service in the event of a defect covered by this Limited Warranty, notify PeakMe as soon as possible and use all reasonable means to protect the Therapy Belt from further damage. Upon proof of purchase, a designated service representative will correct the defect subject to the terms and conditions contained in this Limited Warranty. There will be no charge for parts or labor to repair the defect, although providing access to affect the repair is your responsibility as the owner.The Manufacturer reserves the right, at its sole option, to either repair or replace any covered part, and in the event it chooses to provide a replacement Therapy Belt, it will be of equal value to the original purchase. In such an event, reasonable costs for removal of the original purchase, shipping costs from the factory for the replacement product will be your responsibility as the owner. The replacement will carry the balance of the original warranty.
Warranty Limitations
This Residential Limited Warranty is void if: Used in a commercial setting, the Manufacturer or its designated representative determines that the Therapy Belt has been subjected to alteration, neglect, misuse or abuse, or freight damage caused by the common carrier; any repairs have been attempted by anyone other than a designated representative; or if the failure is caused by accident, acts of God or other causes beyond the control of the Manufacturer. Neglect, misuse and abuse include any installation, operation or maintenance of the Therapy Belt other than in accordance with the instructions contained in the owner's manual provided with the Therapy Belt, including but not limited to the failure to maintain proper chemical balance and the use of abrasive or improper cleaners or non-genuine parts and accessories. Therapy Belt used in commercial applications are excluded from any coverage whatsoever. The owner accepts liability for repair work performed by anyone other than the Manufacturer or a designated PeakMe representative. PeakMe is not responsible for work performed on any units outside of Australia.
Limitations on implied warranties
This Limited Warranty takes the place of all other warranties, express or implied, in fact or at law. All warranty service must be performed by the Manufacturer or its designated representative using authorised PeakMe parts. No agent, dealer, distributor, service company or other party is authorised to change, modify or extend the terms of this limited warranty in any manner whatsoever. The Manufacturer will not be responsible for any statements or representations made in any form that go beyond, are broader than, or are inconsistent with any authorised literature or specifications furnished by PeakMe.
Disclaimers
The manufacturer and its representatives will not be responsible for incidental or consequential damages, and shall not be liable for any injury, loss, cost or other damage, whether incidental or consequential, arising out of any defect covered by this limited warranty, including without limitation, loss of use of the Therapy Belt and cost for removal of defective product even if the Manufacturer was advised of the possibility of damage, and water damage. The liability of the Manufacturer under this limited warranty, if any, shall not exceed the original amount paid for the defective product. Coverage under this limited warranty shall commence as of the original date of purchase and the duration of such coverage shall not extend for any reason whatsoever beyond the stated time periods. These disclaimers shall be equally applicable to any service provided by the Manufacturer and its designated representatives.
Legal rights
This Limited Warranty gives you specific legal rights. There are no warranties applicable to PeakMe products except as expressly stated herein or as implied by applicable state and federal laws. You may also have other rights that vary from state to state. Some states do not allow limitations on how long an implied warranty lasts, disclaimer of certain warranties, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.

Frequently asked questions
What wavelengths does the belt use?
It has 240 dual-core LEDs that emit 660nm red light and 850nm near-infrared light, with an irradiance of up to 25 mW/cm² at the surface.
Does it remember my settings?
Yes. Your first session runs at 100% brightness and vibration. After that, memory mode switches on and recalls your last settings each time you turn the belt on.
Is it safe to look at the LEDs?
No. Don’t look directly at the LED panel. If the belt ever feels too warm or uncomfortable, turn it off straight away.
How do I clean and store it?
Wipe it down with a dry, lint-free cloth. Don’t wash it or get it wet. Store it in a cool, dry place out of direct sunlight.
What warranty does it come with?
It comes with a 1-year warranty from the date of purchase, on top of your rights under the Australian Consumer Law. For help, contact the PeakMe team on 1300 986 379 or at support@peakme.com.au.

Talk to our Australian recovery team about which products are right for your goals, your space, and your routine.



























