Please inspect the package on arrival to make sure all items are present.

• 1x Cedar Ice Bath
• 1x Insulated Lid
• 1x Tall Step (hollow)
• 1x Short Step (solid)
• 2x Side Railings
• Assembly screws
• User Manual

Contents may vary depending on the chiller package purchased.

Capacity: 1 Person 

Dimensions: 122 x 80 x 99 cm

Ice Bath Weight: 138kg

Material:

• Interior: Grade 308 Stainless Steel 
• External: Red Cedar

Indoor/Outdoor Use: Both

1. Choose a location: Place the ice bath on a solid, level surface capable of supporting the combined weight of the tub and approximately 380 litres of water. Allow sufficient space around the unit for ventilation and maintenance access.

2. Position the tub: Remove all packaging and position the tub in its final location before filling.

3. Connect the chiller: Attach both water hoses securely between the tub and chiller, ensuring all fittings are hand-tightened. (Chiller sold separately.)

4. Install the filter: Ensure the supplied filter cartridge is installed correctly before operating the system.

5. Fill with water: Fill the tub until the water level reaches the recommended operating line. Do not overfill.

6. Connect power: Plug the chiller into a properly grounded household power outlet. Avoid using extension cords where possible.

7. Set temperature: Power on the chiller and select your desired temperature. Allow sufficient time for the water to reach the selected temperature before use.

8. Enjoy your recovery: Slowly enter the water and follow your preferred cold immersion routine. Replace the insulated lid after each session to improve cooling efficiency and keep debris out.

Reminders

• Enter and exit slowly to reduce the risk of slips or dizziness.
• Keep the insulated lid on whenever the bath is not in use.
• Some people notice results immediately. Most find three to four weeks of consistent daily use is where the shift happens. Consistency is what makes it work.

Proper maintenance preserves both the performance of your Glacier and the natural beauty of the cedar exterior.

Water maintenance
Replace or clean filters according to the recommended schedule. Keep the insulated lid on when not in use. Remove leaves and debris promptly. Change water as required, depending on use frequency.

Stainless steel interior
Wipe down using a soft microfibre cloth with warm water and mild soap. Avoid abrasive pads, steel wool, or harsh chemicals.

Cedar exterior
Canadian red cedar naturally weathers over time. Regular gentle maintenance will help preserve its appearance for years to come.

Please read all safety instructions before operating the product. This product is intended for cold or hot water immersion only.

• Consult your healthcare professional before use if you have cardiovascular disease, high blood pressure, diabetes, epilepsy, respiratory conditions, or are pregnant.
• Children should only use the product under constant adult supervision.
• Never operate the chiller without adequate water in the system.
• Ensure all hose connections are secure before switching on the unit.
• Always connect to a properly grounded electrical outlet.
• Keep electrical connections dry at all times.
• Do not use damaged power cords or electrical components.
• Enter and exit the tub slowly to reduce the risk of slips or dizziness.
• Discontinue use immediately if you experience chest pain, severe discomfort, faintness, or difficulty breathing.
• Do not consume alcohol or recreational drugs before using the ice bath.
• Keep the surrounding area dry and free from slip hazards.
• Disconnect power before performing any cleaning or maintenance.
• Use only genuine replacement filters and approved accessories.

With proper care and routine maintenance, your Glacier Solo Cedar Ice Bath is engineered to deliver years of dependable performance and premium cold therapy.

1 Year Limited Warranty

The Glacier Solo Premium Cedar Ice Bath ("Ice Bath") is warranted for one (1) year from the original date of purchase against defects in materials and workmanship affecting the cedar structure, stainless steel liner, factory-installed plumbing, fittings, valves and hardware, when the Ice Bath is installed, operated and maintained in accordance with the owner's manual. This Limited Warranty is void if PeakMe or its designated representative determines that the Ice Bath has been subjected to damage or failure due to installation of after-market parts that are not Genuine PeakMe branded Parts & Accessories. Genuine PeakMe brand Parts & Accessories are built to our highest standards of quality, durability and performance, and they are designed to work with your Glacier Solo Premium Cedar Ice Bath to ensure optimal performance and function.

This Limited Warranty applies only to the Glacier Solo Premium Cedar Ice Bath. Any separately supplied chiller, pump, electrical equipment or accessories are covered under their own applicable manufacturer's warranty, where provided.

Cosmetic & Natural Material Exclusion 

This Limited Warranty does not cover cosmetic damage or the natural ageing of materials that does not affect the structural integrity or performance of the Ice Bath. This includes, but is not limited to, scratches, dents, scuffs, stains, water marks, fading, discolouration, or weathering of the cedar exterior.

As the Ice Bath is constructed from natural Canadian cedar, variations in colour, grain, knots, texture, and the natural expansion, contraction, checking (small surface cracks), and silver-grey weathering of the timber are normal characteristics of the material and are not considered manufacturing defects.

Normal wear and tear resulting from regular use is also excluded from this Limited Warranty. For commercial installations, the owner is responsible for carrying out routine cleaning, filter replacement, water treatment, and maintenance in accordance with the maintenance schedule outlined in the owner's manual. Failure to perform the recommended maintenance may void this Limited Warranty.

Corrosion & Water Treatment Exclusions 

This Limited Warranty does not cover corrosion, staining, deterioration, or damage to the stainless steel interior or any other components resulting from improper water maintenance, the use of salt water, excessive chlorine or bromine, harsh chemicals, abrasive cleaning products, or failure to maintain clean and appropriately treated water.

Damage caused by the use of unapproved cleaning agents, water additives, or failure to follow the cleaning and maintenance instructions provided in the owner's manual is not covered under this Limited Warranty.

Warranty Service

To obtain service in the event of a defect covered by this Limited Warranty, notify PeakMe as soon as possible and use all reasonable means to protect the Ice Bath from further damage. Upon proof of purchase, a designated service representative will correct the defect subject to the terms and conditions contained in this Limited Warranty. There will be no charge for parts or labour to repair the defect, although providing reasonable access to carry out the repair is your responsibility as the owner. The Manufacturer reserves the right, at its sole option, to either repair or replace any covered part, and in the event it chooses to provide a replacement Ice Bath , it will be of equal value to the original purchase. In such an event, reasonable costs for removal of the original purchase, shipping costs from the factory for the replacement product will be your responsibility as the owner. The replacement will carry the balance of the original warranty. 

Warranty Limitations

This Limited Warranty is void if the Manufacturer or its designated representative determines that the Ice Bath has been subjected to alteration, neglect, misuse, abuse, unauthorised modification, or freight damage caused by the carrier. Any freight damage must be reported within 48 hours of delivery.

This Limited Warranty does not cover damage occurring during relocation, transport, storage, or installation by anyone other than PeakMe or an authorised PeakMe representative. This Limited Warranty also does not apply where repairs have been attempted by anyone other than PeakMe or an authorised PeakMe representative, or where failure results from accident, natural disasters, or other events beyond the reasonable control of the Manufacturer.

Neglect, misuse, and abuse include installation, operation, or maintenance of the Ice Bath other than in accordance with the owner's manual, including but not limited to failure to maintain proper water quality, treatment and maintenance, use of abrasive or improper cleaning products, or installation of non-genuine PeakMe parts and accessories.

This Limited Warranty applies to both residential and commercial installations provided the Ice Bath is installed, operated, and maintained in accordance with the owner's manual.

The owner accepts liability for repair work performed by anyone other than PeakMe or an authorised PeakMe representative. PeakMe is not responsible for work performed on any units outside Australia.

Limitations on implied warranties

This Limited Warranty takes the place of all other warranties, express or implied, in fact or at law. All warranty service must be performed by the Manufacturer or its designated representative using authorised PeakMe parts. No agent, dealer, distributor, service company or other party is authorised to change, modify or extend the terms of this Limited Warranty in any manner under this warranty. The Manufacturer will not be responsible for any statements or representations made in any form that go beyond, are broader than, or are inconsistent with any authorised literature or specifications furnished by PeakMe.

Disclaimers

The manufacturer and its representatives will not be responsible for incidental or consequential damages, and shall not be liable for any injury, loss, cost or other damage, whether incidental or consequential, arising out of any defect covered by this Limited Warranty, including without limitation, loss of use of the Ice Bath and cost for removal of defective product even if the Manufacturer was advised of the possibility of damage, and water damage. The liability of the Manufacturer under this Limited Warranty, if any, shall not exceed the original amount paid for the defective product. Coverage under this Limited Warranty shall commence as of the original date of purchase and the duration of such coverage shall not extend for any reason whatsoever beyond the stated time periods. These disclaimers shall be equally applicable to any service provided by the Manufacturer and its designated representatives.

Legal Rights

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. 

Warranty Claims 

To make a warranty claim, please contact PeakMe Customer Support as soon as the issue is identified. To assist with the assessment of your claim, you may be asked to provide:

• Proof of purchase.
• The product model and serial number (if applicable).
• A description of the issue.
• Clear photographs and/or videos showing the fault.

Do not return the product unless instructed to do so by PeakMe. PeakMe reserves the right to inspect the product, request additional information, or arrange an inspection by an authorised service representative before determining whether the issue is covered under this Limited Warranty. Warranty claims must be submitted within the applicable warranty period. Failure to report a defect within a reasonable time after it becomes apparent may affect your ability to make a claim under this Limited Warranty.